How to Install IO Shield on Your PC Chassis (Step-By-Step Easy Guide)

How to Install IO Shield on Your PC Chassis (Step-By Step Guide)

Install IO Shield: IO shield is a simple metal plate you can insert to fill in the space between your computer casing and the motherboard.

This is the first component that you need to attach on the casing, before you can attach the motherboard or other hardware. Installing anything prior to the motherboard’s extension port can cause you to have the entire building process restarted.

If properly installed, the IO shield will stay attached to the casing. It can be difficult to install it on some cases, likely because it requires a lot of force.

How to Install IO Shield

The IO shield is usually included in the motherboard package as an additional item. It should be easy to install the shield if you have a computer case that is well-built. It may take longer for some casings with low quality or custom IO shields to be installed.

The process is the exact same for everyone. Let’s get started.

Also Read : Rex Parker : Who is Rex Parker?

The Factory IO Shield and the Old One should be removed

Your motherboard may not be compatible with your computer’s IO shield if your computer case has one. You may also be switching to a new motherboard with extension ports that are not compatible with the older one.

You will need to remove the IO shield from the casing in such instances. To do this, simply push the IO shield from the outer edge of the casing. Sometimes you might need to push the IO shield a bit harder to get it out.

Locate the Correct Orientation for IO Shield

Even if the case is upside down, the IO shield will fit onto it. The holes in the shield won’t match the ports of the motherboard. If you don’t fit it correctly, it could cause problems. You will need to determine the best orientation for the IO shield to be placed.

  • Place the motherboard on the desk. While handling the board, we recommend that you use an antistatic mat or wristband.
  • Place the casing on the motherboard’s side.
  • Find out the orientation of the motherboard in its casing, and arrange it on the desk accordingly.
  • To find the correct orientation, simply take the IO shield off the motherboard and line it to the ports.
  • Keep in mind the orientation that you have just identified for the IO shield to be installed in the same manner later.

Bend the Prongs

The IO shield can be found with some prongs or extrusions. These should be connected to the motherboard and the ports. This is the grounding circuit that protects the motherboard from sudden electric surges or static charges.

  • Place the IO shield in line with the port on the motherboard.
  • Push it slightly so the ports can pass through the holes.
  • The smaller prongs should be bent so that they touch the ports .
  • The larger prongs should be bent so they touch the port’s upper side.
  • Now you can remove the IO shield from the motherboard.

Also Read : Frame Rate vs. Refresh rate (FPS vs Hz). What’s the difference?

All rear casing fans must be removed

Some computer cases have rear system fans that are located above or below the IO protection shield. It is difficult to place the shield correctly because of this.

You will need to unscrew any rear casing fans and take them out from the inside.

Do the installation

  • Now we can attach the IO shield to our casing. Let’s proceed with the installation.
  • The casing should be placed in a stable position so it doesn’t move when you apply force.
  • Attach the IO shield from the inside to the space.
  • Pull the shield out of its corners. It is possible that you will need to use force lightly.
  • Repeat this process for each corner. Click sounds should be heard. Ensure that the IO shield’s little bumps are visible from the metal brace.
  • Push the edges to ensure it is fully attached and doesn’t fall off.
  • It may be difficult for some IO shields of lower quality and less expensive to install. You can follow these instructions in such cases.
  • Place the case so that the IO shield space is on the table.
  • Place the IO shield in its proper place and apply force to its corners to ensure proper attachment.
  • Now, insert your motherboard into the casing. Align its port with the IO Shield.
  • Move the motherboard slowly until the ports reach the shield. Make sure that the holes for the motherboard screws align with the pins on your casing.
  • Use the screws to tighten the motherboard.
  • The IO shield should fit perfectly.
  • Now you can move on to the other hardware components.

Also Read : Solution: This device cannot load a driver

Do I need an IO Shield?

The IO shield can be used in conjunction with the computer casing for a few benefits. Let’s take a look at them.

  • It protects their inner parts and their function from interference by electromagnetic devices.
  • It acts as a grounding circuit by providing prongs to the extension ports on the motherboard. This prevents them from static charge.
  • It keeps dust and dirt from easily entering the casing.
  • It plugs in the at the back of your motherboard and adds aesthetics to your PC.

The motherboard now comes with an integrated IO shield. You don’t have to do it yourself.

IO shield is a simple metal plate you can insert to fill in the space between your computer casing and the motherboard.

This is the first component that you need to attach on the casing, before you can put together the motherboard or other hardware. Installing anything prior to the motherboard’s extension port can cause you to have the entire building process restarted.

If properly installed, the IO shield will stay attached to the casing. It can be difficult to install it on some cases, likely because it requires a lot of force.

It may take longer for some custom IO shields and casings of low quality to install.

The process is the exact same for everyone. Let’s get started.

Also Read : 9 Ways to Fix Monitor Input Not Supported

Frequently Asked Questions

What is an IO Shield?

An IO Shield is a shorthand for “motherboard input out shield”, a metal plate that comes with nearly every commercial motherboard currently on the market. These plates are intended to be mounted on the backplates of computer cases.

Your case should have a cutout for the IO shield. No matter what manufacturer the IO shield is, it should fit in the ports at the back of your case. They are designed to fit perfectly on the motherboard they come with.

What is an IO Shield?

There are two main purposes for every IO shield.

This protects the motherboard and the components that are connected to the IOpanel (which include your HDMI cord, USB ports and other connections) from electromagnetic interference (EMI).

To protect your system from dust, the second reason you need an IO shield. There is a lot of space at the back of your computer without an IO shield where dust can collect and cause problems.

An IO shield is another reason that your computer can look more stylish. Higher-end motherboards have IO shields with fewer details that make them stand out. Others will receive IO shields customized to suit their preferences.

What are the Metal Prongs on IO Shield’s Shield? What do they do?

The majority of IO shields, but not all, will have metal prongs near the port cutouts. Some will have prongs that are near the cut-outs while others will have them nearby. It’s a design choice and a usability choice.

These metal prints allow a small part of the metal print to touch the IO panel of your motherboard. This creates a “static grounding” effect between your motherboard and the shield, which decreases the possibility of electrical interference.

Are IO Shields really necessary?

Install Any motherboard that comes with an IO Shield (either a piece in the box, or already installed on the motherboard), It’s easy to do and will pay off in the long-term. It provides protection and looks better. If not, it will sit there and collect dust.

It’s okay to not install it for any reason. It does not offer the same level of protection as you need.

Most people don’t consider electromagnetic interference protection to be a concern, as IO panels are digital. There is a risk of putting something in a port and letting it slide towards the motherboard. It will then shorten a component. Although the chances of this happening is very low, there is still a possibility.

A second thing to consider is that dust can build up on your computer. It shouldn’t matter if you clean your computer regularly and avoid working in dusty environments. It is safe to install, but it can be dangerous to leave it off.

Conclusion: IO Shield Installation doesn’t have to be difficult

It looks easy to set up your own IO shield if you follow the steps. Things can get tricky if your hands aren’t straight or you don’t align things correctly. It is better to have someone else to assist you in keeping everything in order. This is the key to your success.

Every IO shield will be different. If none of the above steps seem to work, you may have a custom IO Shield or an unusual one. In this case, you should follow the manufacturer’s instructions.