How to Connect Multiple Monitors ( Easy Step-By-Step Guide)

How to Connect Multiple Monitors : Multiple monitors are more beneficial than one screen since they allow us to work more easily quick, efficient, and speedy. However, the process of connecting three, two or more screens could be a challenge in the event of a mistake.

If you’re a gamer looking to enhance your visual experience, or a software developer looking to run multiple programs most likely, you’ve considered the option of a multi-monitor configuration. However, connecting them is a lot more complicated than connecting a single monitor.

You’ll have to confirm the compatibility of your devices and then choose a way to connect monitors, alter their positions and adjust the projection settings. In this regard steps, here’s a step-bystep guide to assist you in connecting multiple monitors.

How to Connect Multiple Monitors

Check Compatibility

Check total no. of ports available

It’s important to test the compatibility prior to determining the number of monitors you can connect. The connection of two monitors is simpler and easier than a quad, triple or even more.

Although there’s no limit to the number of monitors you can connect however, you must be aware of the amount of ports you can connect to your primaryboard as well as graphics cards. For instance, some motherboards have at least one or two monitor ports, dependent on the iGPU and the brand.

Additionally, if you intend to connect to a daisy-chain system make sure you need monitors with both output and input DisplayPort 1.2 or Thunderbolt ports. Furthermore, these interfaces should be compatible with those with the MST (Multi-Stream Transport) feature.

If you want to connect wirelessly it is necessary to have an compatible monitor with Miracast. In addition your computer should be able to have Wi-Fi support. If none of this is working for you try using an wireless receiver and transmitter to extend or cast your display.

Enable Multi Display in BIOS [Optional]

While motherboards incorporate graphics as component but most people prefer adding an external GPU to their set-up. In this way ports on both cards are able to be used to connect multiple monitors. But, they’ll not work unless you activate the multi-display setting within BIOS.

Below is a brief demonstration of how you can enable Intel’s IGD Multi-Monitor option on MSI motherboards: MSI motherboard:

1. Connect your computer to a monitor and then start the system.
2. Now, enter the MSI BIOS Using the dedicated keys (Esc) prior to the operating system booting up.
   
   If you’re using an alternative motherboard, please look up the web to locate the BIOS key.
3. Then, go to Settings..
4. Choose Advanced .
5. Hare Choose Hare, then select Graphics Setup.
6. Find the IGD Multi-Monitor Setting and enabling setting and enabling.

Position Your Monitors

Making sure that the monitors are in the right position can help maintain the ergonomics. While the layout of the screens is dependent on your personal ease of use, we suggest keeping the main monitor at the center.

Also Read : How To Check Twitch Logs

If you have a dual-monitor setup you’ll want to keep the main screen in the front of you. After that, put the second display to the left or right. To better understand check out the image below to see the way we have setup two monitors.Positioning dual monitors

Similar to the case of a triple-monitor arrangement you could place the primary monitor in the middle, with the second two on its to the left and right. Although this is a great arrangement but the most ergonomic solution is slight moving the monitorstowards your body, as shown in the image. It is important to note that this will require an additional desk space.Positioning triple monitors

While most people are satisfied with triple or dual monitor configurations, having four or more monitors could help those looking for a large quantity display space. For more information, check out the complete guide for positioning the monitors and the connection of four displays to form the quad setup. You can connect five or more screens in the same manner.

Additional Tips:One difficulty we all encounter when connecting multiple monitors is the need for additional desk space. To get around this, try mounting your monitors with a VESA mount, which allows you to alter the height, angle and positioning with ease. Actually you can put up any number of monitors that you like if you own the correct VESA adapters for mounting.

Connect the Monitors

Once you’ve set up the monitors, you’re now ready to connect them. There are a variety of ways to achieve this and this article walks you through each one in depth.

Direct Port Connection

It is most likely the best and most secure method of linking multiple displays. All you need are the proper ports on your graphic card or motherboard.

Before you proceed, determine the kind that monitor connectivity you’re planning to use. It can comprise HDMI, VGA, DisplayPort, DVI, USB-C, or any other connection of your preference. It is also possible to utilize an distinct interface with each of the connections.

For purposes of demonstration We have used HDMI as well as DisplayPort for this piece. But the procedure for other interfaces need to be the same:

1. The first step is to make sure that each monitor is powered by its appropriate power cable.
2. After that, collect the required amount of data cables according to your requirements. While you’re there, we recommend using smaller cables since this decreases the chance of interference.
3. Plug then the HDMI, or DisplayPort cable to one of the outlets that are on your motherboard, or graphic card. In this demonstration, we’ve utilized the HDMI interface.
4. The other side of the cable of the cable to the input port of your main screen’s interface port.
5. Take the other data connector and connect it to the output port on the graphics card or motherboard.
6. Then, plug the second end of the cable into the second monitor.
7. Repeat the procedure for all other monitors that you have on your set-up.

Daisy Chaining

Another way to setup multi-monitors can be daisy chaining. This is simply connecting the monitors in a sequential manner. This keeps the cables in order and you do not need to rely on the graphics card or motherboard ports.

Within the chain, each of monitors must include DisplayPort as well as Thunderbolt ports that are MST-enabled with the exception of the last. After you’ve verified the compatibility, please follow the next steps to daisy chain multiple monitors:

1. To begin then, click on the OSD (On-Screen Display) button to open your settings for your monitor.
2. Find and select your option MST that will be found in the System option.
3. Make sure that the feature is turned on. You might need to press Yes if a confirmation message appears.
4. Once more, go to your OSD menu. Now, locate and activate Displayport 1.2. Displayport 1.2 option.
5. Then, connect the designated power cables into your monitors. Be sure they have enough power.
6. Choose the Thunderbolt or DisplayPort cable (prefer using shorter cables) then connect the cable to an output port of your computer.
7. After that, connect the other side of the principal monitor’s input port..
8. Then, you’ll need a second Thunderbolt or DisplayPort cable and connect it to the output port on the primary display. Connect the opposite side of your secondary display’s input port.
9. Repeat the procedure for additional monitors.

Using Docking Station or USB Hub

Docking stations are an ideal tool to extend your ports that are available on your desktop or laptop computer. This can be useful in the event that your graphics card or motherboard isn’t equipped with enough ports to connect several monitors.

Similar to a top-end USB Hub that has HDMI as well as DisplayPort interfaces may be used. A HDMI Splitter is a common choice, but it’s not suitable to extend the display.

Please follow the following instructions for using an USB hub or docking Station to set several monitors.

1. The first step is to ensure that all monitors and the device are receiving enough energy.
2. Connect your docking station with the PC via an USB-C (3.1 or greater) or the Thunderbolt cable.
3. Then, connect each data cable into on the device’s output port..
4. Use the opposite side of the cable, and connect them to the ports for input of each monitor..
5. After that, you should restart your computer to verify that the monitors have been successfully connected.

Wireless Connection

If your monitor is compatible with Mircast You don’t have to be concerned about ports and cables. Instead, you can create a dual-monitor system with a wireless connection. This method is very popular with laptop users who make use of this as an additional display.

However, if you’re going to connect two monitors, you’ll have to create the primary monitor first. After that then follow the steps below in order to wirelessly connect your second monitor

1. Click Windows + I to start the Settings application and go into the Apps section..
2. Next, go to Optional Features.
3. Press the View the features button located in the “Add an optional feature” field.
4. Install and activate and install the wireless Display option.
   
   If this feature was already installed, it will be accessible in the section of features that are installed section.
5. Then, select the Bluetooth and devices tab in the left-hand side of the screen.
6. Press the Add device button.
7. When the Add device window is open, choose the Wireless display option and then dock..
8. Then, wait until your computer locates the second monitor. If it is found, choose the device and follow the instructions on screen to connect the device.

Adjust Projection Settings

Once the monitors have been connected, the settings will be automatically synchronized to the most recent configuration. But, you may need to alter the projection settingsbased on whether you’re trying mirror the content of the primary screen or expand the screen. Here’s how to achieve this:

1. Then, click Windows + P to open the Projection settings.
2. After that, choose Select Duplicateif you want to mirror your content across all screens.
   In other cases, choose an Extensionoption.
3. The screen will flash for a moment to confirm that the settings have changed.